If you think one type of electric heater is the same as all the others, you’re mistaken. There isn’t one answer for an electric heater, because there are so many different types. If you’re wondering which electric heater is the most energy efficient, then you’re in the right place. In this article, we’re going to look at a few different types of electric heaters and see which ones do a good job for your home at an affordable price.
Energy efficiency is important. In this past, people used to simply heat rooms without thinking about the impact on the environment or the cost. Energy efficiency helps for both. Even if you don’t care much about the environment (you should do), you probably do care about how much you’re paying in energy bills each month. Especially as fuel is getting more and more expensive year on year.
If you think you’re spending too much money on heating bills and would like to save some money, you might need a more efficient heating system. The right electric heaters will waste less energy and produce more heat for the amount spent on fuel. In this article, we’re going to look at a few different types of electric heaters and what their energy efficiency ratings are like.
What is an electric heater?
Traditional radiators would use a central gas boiler to heat water and then send it through pipes to different radiators. The hot water would then heat the rooms through convection. These boilers would normally run on gas or oil or other natural fuels. They’re a convenient way to heat the whole home, but they aren’t very flexible or adaptable, and are very expensive to install.
If you want a way to heat different rooms that’s more portable, cheaper and easier to install and easier to move, you might want to consider separate electric heaters. These could be oil radiators, which heat their own oil via electricity, or some other similar device. The good thing about these heaters is that they’re easier to install and cheap, and you can take them anywhere. But what’s the best type of electric room heater?
Heating entire rooms for longer periods
If you want to heat a larger room and for a good few hours, you should consider an electric convector radiator. These radiators don’t need to be plumbed into your water supply or central heating, so you can move them around and even put them in different rooms when you need to. However, they do share some similarities with home radiators in that they use convection. Convector radiators can actually be either electrically powered or through traditional hot water pipes, but they use a two-paneled radiator system that’s separated by a number of fins.
These fins make convector heaters much more efficient as they cover a larger surface area. Instead of only heating upwards and a small distance around the radiator like traditional flat paneled systems, convector heaters help get more warm air into different streams of are and flows. This air radiates and convects further away. So these types of heaters are better for heating entire rooms.
While convector heaters are most common in traditional central heating systems, you can get electric versions. The main difference here is that they have their own elements that are heated by an external power supply (normally plugged into the mains). Instead of water coming from another source, electric heaters heat their own oil that stays sealed in each individual radiator.
Convection radiators might be a bit more expensive, but they’re much better for heating entire rooms. Having multiple electric radiators could be expensive and might be harder to manage and regulate the same temperature around an entire home.
The reality is that convector radiators are much more efficient than flat paneled ones, but electric versions are slightly less efficient than standard central heating systems where the water is heated in one place. Especially if you have multiple electric radiators in different rooms, this could consume quite a lot of power.
For heating smaller areas for shorter times
While large convector heaters are better for big rooms or for long-term heating, they aren’t the most efficient if you only want a small amount of heat for a small amount of time. In these instances, you might want to consider fan heaters. These are quick to heat up and can provide a small amount of heat to small areas. These won’t be able to create an even temperature in an entire room like convector heaters, so won’t be as efficient in creating an even flow of temperature around an entire room. However, if you only want a small amount of heat for a shorter period, they are much more efficient and cheaper than using a big convector heater.
Which types of heaters are the cheapest to run?
A halogen heater is the cheapest to run as it consumes the lowest amount of energy. However, that doesn’t make it the most efficient, because it’s much worse at heating an entire room. While convector heaters cost more per hour to run, they can heat a much bigger area and are therefore better for that sort of job. The actual cost of a convector is about the same per hour as a fan heater, but the convector will heat a room much better, so these are more efficient in comparison.
How else can you improve energy efficiency?
Instead of just looking at the heat your produce and how you produce it, you can also make changes to your home to keep more of the energy in. Double glazing and improved insulation are a good place to start. These soon pay for themselves as they help keep more of the heat generated from radiators inside the home, costing less in energy bills. Some people are even starting to install underfloor heating as a more efficient way to heat a home.
Now you know a bit more about energy efficiency and how to heat your rooms better, you can make a wiser choice about which system might be right for your home.